full slip

The forward directivity velocity pulse generated by strike slip fault in full space is studied.

本文在均匀弹性全空间中对走滑断层附近方向性速度脉冲作了定性研究.

The following main achievements were yielded: ( 1) Based on process characteristics of gas-assisted full slip extrusion molding and the theories of rheology and hydrokinetics etc., under reasonable assumption, full three dimension steady isothermal viscoelastic theoretical model of describing gas-assisted extrusion molding process is established.

针对气辅完全滑移挤出成型过程的特点，基于流变学和流体动力学理论，经合理假设，建立了描述气辅完全滑移挤出成型过程的全三维稳态等温粘弹性理论数学模型。

The research results showed that the gas-assisted full slip extrusion molding process can almost eliminate extrusion die swell and distort.

结果表明，气辅挤出技术可基本消除挤出成型中的挤出胀大和变形，减小压降。

We must make full use of their spare time in life, not to allow any one of the self-development opportunities slip.

一定要充分利用生活中的闲暇时光，不要让任何一个发展自我的机会溜走。

Apply to differential slip shaft what full-automatic loading and unloading coil stock, ensure the volume do not shift and loose while counter rotating.

适用于全自动装卸卷料的滑差轴，保证正反转时卷芯不移位，不松动。

So there are more complicated contents to study in the gas-assisted full slip extrusion molding process than in the traditional extrusion molding process.

因此，气辅完全滑移挤出成型技术比传统挤出成型蕴含着更丰富、更复杂的研究内容。

To study the interface slip and the deflection properties of a new type of steel-encased concrete composite beams, four full size simply supported specimens with different shear connection coefficient were designed. One was a beam with full shear connection, and the others with partial shear connection.

为研究新型外包钢-砼组合梁的钢-砼交界面相对滑移及变形性能，设计4根不同剪力连接系数足尺简支梁，其中1根为完全剪力连接组合梁，其余为部分剪力连接组合梁。

Study of Numerical Simulation for Three-Dimensional and Isothermal Viscoelasticity on Full Slip Extrusion Process of Gas-assisted Dies

气辅口模完全滑移挤出成型过程的三维等温黏弹性数值模拟研究

To study the interface slip and deformation character, four simple supported specimens of full size have been performed, the load-slip curves, load-deflection curves are established through the experiment.

为研究其钢-砼交界面相对滑移及变形性能，通过4根足尺简支梁的试验研究，得到组合梁的荷载-滑移、荷载-挠度关系曲线。